In order to give you a better service Airbus uses cookies. By continuing to browse the site you are agreeing to our use of cookies I agree

Sepang Aircraft Engineering (SAE), an MRO centre based in Kuala Lumpur, Malaysia, partially owned by Airbus since 2011, has become a fully owned Airbus subsidiary, following the acquisition by Airbus of its remaining shares.

Consulting for MRO

Your partner for excellence

Airbus Consulting team will support you to decrypt the market trends and define your competitive advantage

Aircraft maintenance is about increasing mechanic hours productivity by a proper production planning, execution and control. Rotables and consumables are the blood of the MRO. The right spare needs to be at the right place and right time without compromising the passenger experience and your business profitability.

Below are the three main types of maintenance that fall under the MRO umbrella.

  • Preventive Maintenance. This type of maintenance is done regularly before issues arise in order to keep equipment and processes running smoothly.
  • Corrective Maintenance. This refers to maintenance completed after a problem has occurred, whether dealing with general wear and tear or a complete breakdown.
  • Predictive Maintenance. Predictive maintenance is done based on the data obtained from monitoring processes that track historical trends, allowing for reliable failure predictions.

Airbus Consulting M&E experts comes from the MRO shop floor and MRO executive positions. They will support you to decrypt the market trends and define your competitive advantage. They will also support you to reach the operational excellence and increase your business performance and business margins.

 

Line Maintenance

Line Maintenance

From support to Entry into Service of a new aircraft type, organisation optimisation, resources sizing to efficiency enhancement, our team of highly experienced experts, having direct access to aircraft and airline data, will assist you in every steps, having always in mind the basics of Line Maintenance: safe aircraft ready to take-off on time.

 

We can help you answer these questions:

 

  1. How many Licenced Engineers do I need to maintain my fleet cost efficiently?
  2. Should I outsource or insource outstations?
  3. How do I structure my organisation to be able to perform A-checks-light maintenance?

 

EASA Part 145 Certification

EASA Part 145 Certification

Airbus Consulting proven assistance package and methodology will take you by the hand through the preparation and approval process not only targeting full compliance and final certification but also raising the overall standards across your MRO. Airbus Consulting will combine a deep understanding of the regulation and its interpretation with a sound knowledge on industry standards to provide you with customised recommendations that will simplify compliance in your particular environment.

 

We can help you answer these questions:

 

  1. How is the EASA Part 145 approval process and how do I prepare for it? 
  2. What is the envelope of regulations and requirements I need to comply with? 
  3. How can I ensure I am in compliance without over tightening my procedures?

 

MRO Start-Up

MRO Start-Up

Benefit from the unrivaled expertise of a manufacturer to launch your start-up MRO. From market opportunity identification to implementation, our team will bring Airbus’ big picture of aeronautic industry and technical expertise to every phase of your project.

 

We can help you answer these questions:

 

  1. What is my position in the competitive MRO landscape?
  2. How to design and implement an effective roadmap development strategy?
  3. How to increase/adapt my capability and make the best of my assets?

 

Wilhemshaven (Germany), le 27 janvier 2016. Photo © Christophe Guibbaud

Supply Chain

Your company might be shaken by a crisis and need to adapt drastically its supply-chain. Thanks to its team of experts and a proven methodology, Airbus Consulting will help your company to recover and even transcend your initial efficiency and competitiveness levels.

We can help you answer these questions:

 

  1. Do I have the right make or buy policy? 
  2. How can I optimise and digitalise my sourcing processes?
  3. Do I have the right material planning and stock level management practices?

 

 

Digital Innovation

Digital Innovation

Maintenance Information System (MIS), data quality, digital maturity, innovation, benchmarking, market intelligence, artificial intelligence,... all this will be considered by our team of experts to allow you to catch up with the latest market evolutions.

We can help you answer these questions:

 

  1. Is my MIS covering all my CAMO/MRO needs? 
  2. How can I manage the migration to a new MIS? What are the critical aspects? 
  3. Are my facilities ready for maintenance mobility (tablet)?

 

Efficiency

Efficiency

The aim of this consulting service is to support MRO in assessing the “AS IS” process maturity including a Value Stream Mapping (VSM). Our experts will also build a road map to assist you in continuously optimising your quality, lead-time and operating costs, reducing waste to a minimum.

We can help you answer these questions:

 

  1. How to increase my capability and make the best of my assets?
  2. How to design and implement an effective road map development strategy?
  3. How to optimise existing MRO Processes?

 

Talk with our experts

Talk with our experts

Our MRO Consulting experts are ready to answer your questions

So we can help serve you better, please complete the form below. We will respond as soon as possible, our experts usually answer all queries in less than 24 hours.

I understand that the information provided by me is subject to the Privacy Policy.

Back to top